ATTENTION CONTRACTORS: ARE YOU LOSING TOO MANY EXCAVATION BIDS?
How to Crank Out Excavation Bids Like Pro Even
If You’ve Never Used Excavation Software Before
Discover How Easy Our EarthWorks OnScreen Makes
Turning Out Fast and Accurate Excavation Bids
If You’ve Never Used Excavation Software Before
Discover How Easy Our EarthWorks OnScreen Makes
Turning Out Fast and Accurate Excavation Bids
- Are you buried in dirt bids?
- Are you spending more time bidding in the office than relaxing at home?
- Are you bidding more but winning less?
- Are your competitors leaving you in the dust no matter how hard you work?
It’s not your fault!
The construction business has becoming outrageously competitive. Some companies even bid below cost just to drive their competitors out of business.
If too much bidding and not enough winning is your problem, then EarthWorks OnScreen is your solution.
EarthWorks OnScreen is so easy to use that if you can read a site plan and you can click a mouse, then you can do an excavation takeoff.
With EarthWorks OnScreen, you can be up and running and turning out your own accurate excavation estimates in just an hour or two if you follow this simple 3 step “Getting Started” formula.
Getting Started:
1. Attend a 45 minute one-on-one training session.
2. Download and activate the EarthWorks OnScreen trial.
3. Takeoff the tutorial drawing for practice.
With EarthWorks OnScreen, you can be up and running and turning out your own accurate excavation estimates in just an hour or two if you follow this simple 3 step “Getting Started” formula.
Getting Started:
1. Attend a 45 minute one-on-one training session.
2. Download and activate the EarthWorks OnScreen trial.
3. Takeoff the tutorial drawing for practice.
Imagine what it would be like to spend minutes rather than hours doing your takeoffs and with much higher accuracy. That means no more late nights at the office. No more missed weekends with your family. No more laying awake at night wondering if your takeoffs are accurate.
For the past 23 years, we’ve been perfecting our EarthWorks OnScreen software to be the easiest to use and most affordable excavation software on the market. We’ve helped thousands of contractors just like you to be more productive and more accurate with their excavation bidding.
After following our 3 step “Getting Started” formula for our EarthWorks OnScreen trial, you will:
And we’ll be with you the whole way answering any questions you have. In fact, we’ll even look over your first few drawings just to back you up!
- Complete your excavation takeoffs up to 5x faster – With EarthWorks OnScreen, all you have to do is enter the elevations and then we do all the time-consuming and tedious math.
- Produce much more accurate takeoffs – We give you multiple ways to check your work and EarthWorks OnScreen automatically flags most common errors.
- Be more productive with your bidding – With less time spent doing your takeoffs the old way, you can have all those hours back to do more productive work and spending time doing the things you enjoy.
And we’ll be with you the whole way answering any questions you have. In fact, we’ll even look over your first few drawings just to back you up!
Here’s what some of our customers say about EarthWorks OnScreen…
Robin Matheson - Matheson Construction
Robin Matheson - Matheson Construction
- I would like to take this opportunity to commend you and your company for your great customer service standards, congratulations on providing a great product and support system which I've been able to put to work from the very first day, I love it.
- After using AGTEK, I was looking for a system that was more user-friendly. I did research into other systems before I got my first EarthWorks. One of the things I was looking for was support and (they) have been there for me when I've had a problem. They also know how to fix the problems. Over the past nine years I have added four more units and have recommend EarthWorks to four other grading companies that are now using it. With a supported service that you get from Trakware I would keep recommending EarthWorks to other contractors.
- Trakware’s EarthWorks is a huge asset to our company. It saves us hours of takeoff time, calculating quantities and organizing reports.
- EarthWorks been the most user-friendly software I have used. It does what I need it to do without being needlessly complicated.
- EarthWorks is a valuable tool we use to quickly and accurately analyze how efficiently dirt is moved, utilized, imported or exported for our projects. The program is user friendly and has built in diagnostic features. The color maps and 3-D views are an outstanding tool to demonstrate the earthwork requirements to our clients.
- The software is very easy use. I basically taught myself how to do general takeoffs. As I worked more and more with the software I found shortcuts and other valuable tools to speed up my takeoff time. It's a great product.
- I've been an EarthWorks user since 1993 and have never been disappointed by its ease-of-use, results or the support from the Trakware staff.
- This is a very user-friendly program that helps me bid projects more accurately and with more confidence.
- It's a great program.
So, sign up for a free trial of EarthWorks OnScreen and see how it can turbocharge your takeoffs, dramatically reduce your bidding time and give you hours back every day.
Just fill in the "Get Me Started" section below and click the button.
Once you do that, here’s what will happen next:
1. TRAINING – Within the hour, we’ll contact you to set you up with a one-on-one
training right on your own computer. The trainer will take you through a basic takeoff
and show you how to use EarthWorks OnScreen to get the fastest and accurate
takeoffs possible.
2. ACTIVATE – After the training, the trainer will help you download and activate your
trial of EarthWorks OnScreen.
3. SUPPORT – We’ll be there to answer any questions you have during the trial. Plus,
we also have over 6 hours of training videos built right into the software plus 7 live
training classes every week.
Just fill in the "Get Me Started" section below and click the button.
Once you do that, here’s what will happen next:
1. TRAINING – Within the hour, we’ll contact you to set you up with a one-on-one
training right on your own computer. The trainer will take you through a basic takeoff
and show you how to use EarthWorks OnScreen to get the fastest and accurate
takeoffs possible.
2. ACTIVATE – After the training, the trainer will help you download and activate your
trial of EarthWorks OnScreen.
3. SUPPORT – We’ll be there to answer any questions you have during the trial. Plus,
we also have over 6 hours of training videos built right into the software plus 7 live
training classes every week.
Once your free trial is done and you know that EarthWorks OnScreen is a perfect fit for you, you can start using EarthWorks OnScreen full time for as little as $315.70/month for 12 months or purchase it outright with a one time payment of $3497 (That's a savings of $291.42!)
So, don’t delay. If you are still doing takeoffs the old-fashioned way you are losing precious time and money by not acting now.
Let EarthWorks OnScreen and our knowledgeable training staff get you moving towards a better way of bidding and a better way of living.
Simply provide the information below or call me at (888) 790-6298 X 202 to get started.
Let EarthWorks OnScreen and our knowledgeable training staff get you moving towards a better way of bidding and a better way of living.
Simply provide the information below or call me at (888) 790-6298 X 202 to get started.
Try EarthWorks OnScreen Risk Free: If you don’t like EarthWorks OnScreen
after your trial is complete, then simply do NOTHING!
There’s no obligation to purchase.
after your trial is complete, then simply do NOTHING!
There’s no obligation to purchase.
So, enter a trial request below and get started now!
Sincerely,
Blaze Nitzel
Trakware, Inc.
(888) 790-6298 X 202
Blaze Nitzel
Trakware, Inc.
(888) 790-6298 X 202
Get started by filling out the free trial request below!
PS. EarthWorks OnScreen was developed over the course of 23 years to be an easy-to-use and affordable answer to the over-priced and over-complicated excavation software that previously dominated the market. We offer no-risk trials with one-on-one training that allows you to fully use EarthWorks OnScreen so that you can see how easy it is to produce fast and accurate takeoffs. If after the trial you wish to continue using EarthWorks OnScreen, you can sign up for payment plans starting for as little as $315.70 a month for 12 months or purchase it outright with a one time payment of $3497.
Frequently Asked Questions
Q: How much is the software?
EarthWorks OnScreen is $3497. If you want to also use a digitizer or import AutoCAD 2000DWG files, add $500 for each.
Q: Can we do a payment plan?
Yes, we have 4 month no-interest payment plans starting at $874.25 and 12 month plans starting at $315.70.
Q: What’s required to run EarthWorks OnScreen?
EarthWorks OnScreen will run on any Windows computer running Windows 10, 8, 7, Vista, or XP. It also runs on any edition of Windows Server.
Q: Can we try the software?
Yes! The trial is free. Just fill out the form above to attend our 1 hour one-on-one training program to learn how easy EarthWorks OnScreen is to use and the trainer will help you get your trial set up.
Q: How long is the learning process?
Once you attend our 1 hour one-on-one training class and do a practice takeoff with our tutorial drawing, you’ll be ready to start your first takeoff the same day.
Q: Do you have a 3D View?
Yes, we do. You can view your site in 3D from any angle and distance.
Q: How much is annual maintenance/support for EarthWorks OnScreen?
Phone support and upgrades for EarthWorks OnScreen are free for the first year. After the first year, annual support is $300 for standalone version and $500 for the network version.
Q: How many people can use the program?
Once you purchase EarthWorks in full, you'll receive your license as a USB key. Then you can install EarthWorks on as many computers as you want and switch computers by moving your USB license between computers as needed.
Q: Can we get free training?
We start you off with an hour of one-on-one training so that you understand the basics of the software. You are free to attend any of our 7 live training classes offered every week or watch any of the 6 hours of training video built right in to EarthWorks. We are also available via phone and email during your trial and after your purchase to answer any of your questions. At any time you can send us any of your drawings if you have specific questions about them. We can then make a video of our answer. Don’t worry. We’ll be there for you.
Q: Do you have that auto-trace thing where you don’t have to trace stuff?
Yes and it’s called Vector takeoff. For any PDF saved directly from AutoCAD, we can import all your linework directly. That means you can complete a takeoff with little or no tracing.
Q: Can you export information?
YES! If you have your favorite spreadsheet in Excel, you can export your cut and fill numbers directly into your spreadsheet.
And if you purchase the AutoCAD Element, we can export all your Proposed elevations as an AutoCAD DXF file. You can then import that DXF file into any other program.
Q: Do you guys do takeoffs?
We have a service called Takeoff Army that will enter all your drawing’s elevations, building pads, parking lots and such. All that you’ll have to do is put in the drawing’s Perimeter and Topsoil areas. That means we do 90% of the takeoff for you. If you’d like someone to do complete takeoffs for you, we have several independent estimators we can recommend to you.
Q: How long have you been in business? Are you going anywhere?
We started Trakware in 1992 and introduced EarthWorks at the ConExpo in Las Vegas in February of that year. Our approach of writing simple-to-use and affordable software has been successful from the start and we look forward to serving the construction industry for decades to come.
Q: Do you do trenching?
Yes. You can enter have multi-leg, multi pipe trenches.
Q: What are the minimum hardware requirements?
RAM requirements for EarthWorks OnScreen are: WinXP - 512MB, Windows Vista – 1MB, Windows 7, 8 and 10 – 2MB. Disk requirements are 1.2GB of free space.
Q: Can I run EarthWorks OnScreen on my Mac?
Yes, but you need to install Parallels and a copy of Windows 7, 8 or 10. This allows you to install run any Windows software on your computer for less than $175.
Q: Why do I have to have one-on-one training before I start my trial?
Spending an hour in one-on-one training means you’ll spend far less time getting up to speed on the software yourself. Plus it’s our way of introducing you to our excellent support staff.
Q: What if I don’t want EarthWorks OnScreen after the trial?
This is a no-obligation, no-risk trial. If you don’t like it, then do NOTHING.
Q: What if I already have excavation software installed. Will downloading your trial mess it up?
Nope. Your current software will work as it always has.
Q: Can I install EarthWorks OnScreen on more than one computer?
For the trial, you can install EarthWorks OnScreen on one computer. After you purchase EarthWorks OnScreen in full, you can install EarthWorks OnScreen on any number of computers and move the USB license between them.
Q: Is there a network version of EarthWorks OnScreen?
Yes! For an additional $500, you can upgrade your EarthWorks OnScreen license to a server edition. This will allow you to access your EarthWorks OnScreen license(s) from any computer on your network. The number of simultaneous users is set by the number of licenses you purchase.
Q: Can I use a digitizer with EarthWorks OnScreen?
Yes! For an additional $500, you can add the ability to interface with a digitizer. The digitizer must support a Wintab driver such at TabletWorks from GTCO. This function will be available during your trial so feel free to give it a try.
Q: Can I import AuotCAD files with EarthWorks OnScreen?
Yes! For an additional $500, you can add the ability to import AutoCAD 2000DWG or DXF files into EarthWorks. This function will be available during your trial so feel free to give it a try.
